Thursday, February 29, 2024

Crazy Cat Lady Card!

I’m delighted to be returning to the Imagine Crafts AIR program again this year. Our first assignment was to create a project that reflected ourselves. I love creating scenic cards, magical creatures, and cats! 


Imagine Crafts Supplies:

VersaFine Clair - Nocturne*

Memento Dew Drop - Dandelion

Memento Dew Drop - Angel Pink

Memento Dew Drop - Summer Sky

Memento Dew Drop - Blue Danube

Memento Dew Drop - Cottage Ivy

Memento Dew Drop - Bamboo Leaves

Fireworks ! Shimmery Craft Spray - Blue Danube

VersaMark - Frost

Delicata - Black Shimmer

MBoss - Black

Sponge Daubers

Fantastix

Tear It! Tape

Craft Mat


Other Supplies:

Solar White Classic Crest Cardstock by Neenah Papers

140 lb. Mixed Media Paper by Strathmore

Raven Cardstock by Bazzill Basics

Puss in Boots Clear Photopolymer Stamp Set by Pink Ink Designs*

Acetate Hills Mask by Lavinia Stamps*

Copic Markers: Y000, Y02, Y21, YR00, R000, R00, RV10, V20, V22, C00, C0, C1, C3, FV2, R83, RYR18, B20. YG45

91% Isopropyl Alcohol

Repositionable Sticker Paper by Avery

Fiskars Curved Craft Scissors

Low-tack Tape

Stamping Platform


Please note: The products with asterisks are available at Topflight Stamps! 


Instructions:


Step 1:

Use magnets to secure a 4” x 5.25” piece of white cardstock onto the base of a stamping platform. 


Use Nocturne VersaFine Clair ink to stamp the Puss in Boots image twice — once onto the image panel and once onto repositionable sticker paper.










Step 2:

Fussy-cut the sticker paper version and place it onto the image panel as a mask.
















Step 3:

Use low-tack tape to secure the rolling hills mask from the Acetate Hills Mask set to the image panel as shown.


Use a sponge dauber to apply Dandelion Memento ink over the mask and masked image onto the image panel. (3A). Use another dauber to apply Angel Pink Memento ink onto the image panel so the pink ink is slightly overlapping and blending with the yellow ink (3B). Repeat this step with Summer Sky Memento ink (3C), then Danube Blue Memento ink (3D).





Step 4:

Spray the image panel with 91% Isopropyl Alcohol to slightly blend the colors and to add some white speckles and splatter.















Step 5:

Trace the rolling hills mask from the Acetate Hills Mask set onto white cardstock, fussy-cut along the trace lines. Label the top and bottom of the mask so you know which is which.


Place the top homemade mask over the sky area of the image panel and secure with low-tack tape. 


Use a Fantastix to apply Cottage Ivy Memento ink over the mask onto the image panel (5A). 


Place the acetate rolling hills mask below the hilly horizon. Use a Fantastix to apply Cottage Ivy Memento ink over the mask onto the image panel (5B). Continue this process to add additional grassy hills. 



Step 6:

Use a sponge dauber and Bamboo Leaves Memento ink to fill in the grassy hills. 


Colors the white area of the tail and the wings with Copic markers. Set the image panel aside.












Step 7:

Place a piece of 4.75” x 6.75” Mixed Media cardstock into a box. Spray the panel with Danube Blue Firewords Spray to create a shimmery blue background panel. Heat set.














Step 8:

Use magnets to secure the background panel to the base of a stamping platform so that panel is sideways. Position the long leafy border stamp from Puss in Boots Clear Stamp Set facedown along the edge of the background panel. Press the platform’s lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.


Keeping the stamp on the platform’s lid, flip the background panel, secure it with magnets, and stamp the border on the other side of the background panel. Heat set.



Step 9: 

Reposition the background panel as shown and secure with magnets. Place the small flourish stamp facedown horizontally on the top left of the background panel. Press the platform’s lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.


Clean and dry the stamp. Reposition it so that it’s facedown on the top left of the panel. Press the platform’s lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.


Remove the flourish stamp. Place the paw print stamp so that it’s centered and facedown on top of the background panel.  Press the platform’s lid onto the back of the stamp, lift the lid, ink the stamp with Nocturne VersaFine Clair, and stamp. Re-ink and stamp again if necessary to attain a good impression. Heat set.



Step 10:

Place the “Crazy Cat Lady” stamp facedown so that it’s centered at the bottom of the image panel. Press the platform’s lid onto the back of the stamp, lift the lid, ink the stamp with Frost VersaMark ink, and stamp. Repeat.












Step 11:

Sprinkle on Black MBoss Powder, slide the the excess powder back into the bag, and heat set the sentiment.















Step 12:

Use a Sponge Dauber to edge the background panel with Black Shimmer Delicata ink (12A). Heat set.


Trim the image panel to 4.25” x 5.25” and edge with Black Shimmer Delicata ink (12B). Heat set.



Step 13:

Use Tear It! Tape to adhere the image panel to the background panel and the background panel to a 5” x 7” black card.














Thanks for visiting!

Tuesday, February 20, 2024

Let's Crow -- a Birthday Card!

It's Tuesday, my day to share a project created for Topflight Stamps. This week is an "Anything Goes" theme on the TFS blog so I've made a birthday card with Pink Ink Designs' Rook and Roll Clear Photopolymer Stamp Set and Lavinia Stamps' Vine Branch Clear Polymer Stamp. I also used the Frayed Frames Die Set #26 by AALL and Create and patterned paper from the Ink Drops - Midnight 6x6 Paper Pad by Craft Consortium.

Here's the card!


Topflight Stamps Products Used:

Other Products Used:
Solar White Classic Crest Cardstock by Neenah Papers
Raven Cardstock by Bazzill Basics
Copic Markers: 
Crow: BV23, BV25, BV34, N3, N4, N5, N6, N7, FV2
Leaves: YG07, YG09
Branch: E70, E71, E74, E77
Green and Purple Glitter Posca Paint Markers by Uniball
Tumbled Glass Distress Ink by Tim Holtz for Ranger Ink
Mini Cloud Edger and Cloud Edger Stencils by My Favorite Things
Repositionable Sticker Paper
STAY-tion by Wendy Vecchi for Ranger Ink
Stamping Platforms

Instructions:
  1. Cut a piece of black 12" x 12" cardstock in half, score at 6", and fold to form a 6" square card. Set aside.
  2. Use magnets to secure a 4.5" x 6" panel of white cardstock to the base of a stamping platfom.
  3. Use Tuxedo Black Memento Ink to stamp the left-facing crow from the Rook and Roll Clear Photopolymer Stamp Set twice — once onto white cardstock and once onto repositionable sticker paper.
  4. Fussy-cut the sticker paper version and place it over its counterpart on the image panel as a mask.
  5. Position the Vine Branch stamp facedown on the image panel under the crow's foot.
  6. Press the lid of the stamping platform onto the back of the stamp and lift.
  7. Use Tuxedo Black Memento Ink to ink the Vine Branch . Stamp twice — once onto the image panel and once onto repositionable sticker paper.
  8. Fussy-cut the sticker paper version and place it over its counterpart on the image panel as a mask.
  9. Secure the image panel to the STAY-tion with magnets.
  10. Place a cloud edger stencil onto the top of the image panel.
  11. Brush Tumbled Glass Distress ink over the top of the stencil onto the image panel to start to create a cloudy sky.
  12. Rotate the cloud stencil and move downwards.
  13. Brush Tumbled Glass Distress ink over the top of the stencil onto the image panel.
  14. Repeat Steps #12 and 13 until the cloudy sky background is completed.
  15. Lift the masks.
  16. Color the images with Copic markers.
  17. Use the Green Glitter Posca Paint marker to add sparkly green paint to the leaves.
  18. Use the Purple Glitter Posca Paint marker to add sparkly purple paint to the ornamental dots around the crow.
  19. Use the larger die from the Frayed Frames Die Set #26 to cut the image panel.
  20. Trim a piece of black cardstock so it's slightly larger than the die-cut. Use to mat the image panel. 
  21. Use magnets to secure a small piece of white cardstock to the base of a stamping platfom. 
  22. Place the leaf ornament stamp from the Rook and Roll Clear Photopolymer Stamp Set facedown on the white cardstock.
  23. Press the lid of the stamping platform onto the back of the stamp and lift.
  24. Use Tuxedo Black Memento Ink to stamp the leaf flourish.
  25. Remove the leaf flourish stamp from the stamping platform.
  26. Position the "Happy Birthday" sentiment from the Rook and Roll Clear Photopolymer Stamp Set facedown slightly above the leaf flourish.
  27. Press the lid of the stamping platform onto the back of the stamp and lift.
  28. Ink the sentiment stamp with Green Oasis VersaFine Clair Ink and stamp.
  29. Use Copic markers and the Purple Glitter Paint marker to color the leaf flourish.
  30. DIECUT THE SENTIMENT?????
  31. Trim a piece of patterned paper from the Ink Drops - Midnight 6x6 Paper Pad to 5.875" square and edge with black marker.
  32. Adhere the patterned paper to the reserved 6" square black card.
  33. Adhere the image panel as shown.
  34. Adhere the sentiment strip as shown.
Thanks for visiting today!



Tuesday, February 13, 2024

Meow!

Greetings! It's Tuesday, my day to share a project created for Topflight Stamps. This week my teammates and I are focusing on Studio Light's wonderful products. When I saw the Cat Gentleman Clear Stamp, my inner vintage-Steampunk-grunge loving crazy cat lady heart knew I had to have it. 

Here it is!


Topflight Stamps Products Used:

Other Products Used:
Solar White Classic Crest Cardstock by Neenah Papers
Bristol Paper by Strathmore
Raven Cardstock by Bazzill Basics
Slimline Layers Die by Waffle Flower Crafts
Black Soot Distress Ink by Tim Holtz for Ranger Ink
Lightning Black and Starlite Silver Brilliance Inks by Imagine Crafts/Tsukineko
Flag Die: Source Unknown
Copic Markers:
Cat's Fur: C00, C0, C2, Cr, C6
Cat's Ears and Nose: RV91, R00, R01
Cat's Eyes and Numbers: G20, G21, G24, G28, G40
Hats: BV23, BV25, N4, N6
Tie and Hatbands: R24, R27, R39
Watch: Y21, Y23, Y26, Y28, BG0000, BG000, E40
Shirt: W0, W1, E40
Small Postmarks: B41
Background: Y0000, Y000, Y00, BG0000, BG000, <B91, B91, R00, R11, R56
Steampunk Heart Clear Stamp Set by Studio Light
Clear Detail Embossing Powder by Stampendous
Pouncing Tool
Removable Sticker Paper by Avery
Acetate: from packaging
Stamping Platforms
Clear Stamping Blocks

Instructions:
  1. Cut a piece of black cardstock to 8.5" x. 8.5", score at 4.25", and fold to form a slimline card.* Set aside.
  2. Use Tuxedo Black Memento Ink to stamp the Cat Gentleman twice –– once onto white cardstock and once onto repositionable sticker paper.
  3. Use Copic markers to color the Cat Gentleman and the background on the image panel.
  4. Fussy-cut the sticker paper version of the Cat Gentleman and place it over its counterpart as a mask.
  5. Use one of the dies from the Slimline Layers Die to cut the image panel.
  6. Pounce Black Soot Distress Ink, Lightning Black Brilliance ink*, and Starlite Silver Brilliance Inks onto the image panel to add grunginess.
  7. Edge with Lightning Black Brilliance ink.
  8. To create the background, cut a piece of Bristol Paper to 4.25" wide.
  9. Smoosh Della Blue Elements Ink onto the piece of acetate, use a Fine Spray Mister to mist with water, then press the inky acetate onto the Bristol Paper to apply the ink.
  10. Heat set the background.
  11. Clean the acetate.
  12. Repeat Steps #8 - 10 with Mermaid, then Sundance, and then Confetti Elements Inks until you're happy with the background.
  13. Thoroughly heat set the background panel.
  14. Use magnets to secure the background panel to the base of a stamping platform.
  15. Position the Vintage Clocks Clear Stamp facedown along the left side of the image panel. 
  16. Press the platform's lid onto the back of the stamp and lift.
  17. Ink the stamp with Nocturne VersaFine Clair Ink and stamp onto the background panel. 
  18. Heat set the background panel. *
  19. Remove the stamp from the platform's lid. Thoroughly clean and dry the stamp.
  20. Re-position the Vintage Clocks Clear Stamp facedown on the right side of the image panel.
  21. Press the platform's lid onto the back of the stamp and lift.
  22. Ink the stamp with Nocturne VersaFine Clair Ink and stamp onto the background panel. 
  23. Heat set. the panel.
  24. Remove the image panel from the platform.
  25. Using Nocturne VersaFine Clair Ink, stamp the paw print stamps from the Meow Small Clear Stamp Set onto the empty areas of the background panel.
  26. Heat set the background panel.
  27. Adhere the background panel to the front of the reserved black card.
  28. Trim the background panel to 4.25" x 8.5" and edge with Lightning Black Brilliance Ink.*
  29. Take a piece of scrap Bristol Paper and repeat Steps #9-13. Heat set.
  30. Use magnets to secure the colored scrap of Bristol Paper to a stamping platform.
  31. Place the "Meow" stamp from the Meow Small Clear Stamp Set facedown on the colored Bristol Paper.
  32. Press the platform's lid onto the back of the stamp and lift.
  33. Ink the stamp with Lightning Black Brilliance ink.
  34. Remove the sentiment scrap from the stamping platform.*
  35. Dump clear detail embossing powder onto the wet ink, dump off the excess, and heat set.
  36. Return the embossed sentiment scrap to the platform and secure with magnets.
  37. Re-ink the stamp with Lightning Black Brilliance ink.
  38. Repeat Steps #34 and 35.
  39. Let the embossing powder cool.
  40. Use a flag die to cut the sentiment.
  41. Edge the sentiment with Lightning Black Brilliance ink.
  42. Adhere the sentiment to the card as shown.
Notes:
  • Lightning Black Brilliance ink is a gold/black metallic ink.
  • Slimline cards can be many sizes, the most common being 3.5" x 8.5". 
  • Mine was meant to fit in a #10 envelope (4" x 9"ish), but I forgot to trim .25" from the card once the background panel was adhered. Oops.
  • Keep packaging acetate. It's useful as an ink applicator or as a shaker card window. Some acetate can be heat or dry embossed.
  • Be mindful of which stamping platform you're using. You CAN NOT heat emboss on the base of the Misti Platform. You can on the Tonic platforms. Don't ask how I know.
Thanks for visiting today!


Tuesday, February 6, 2024

Coffee Themed Tag Album

It's Tuesday, my day to share a project created for Topflight Stamps. This week's theme is Anything Goes and I've made a coffee-themed accordion tag album with Zig Zag Journal Die Set by Studio Light, the Coffee and Chocolate Patterned 8x8 Paper Pad, and the Coffee and Chocolate Backgrounds 8x8 Paper Pad by Stamperia. The stamps used are AM Dee Clear Stamp Set #737,  Barista Dee Clear Stamp Set #760, Coffee Time Clear Stamp Set #417, Coffee First Clear Stamp Set #252, Morning Clear Stamp Set #253, and Safety First Clear Stamp Set #254 –– all by AALL and Create. Some sentiments on the album are from the Sharp Tongues White Ephemera Die Cuts by Autour de Mwa for AALL and Create.

Here's a photo of the album folded up with a belly band.


Here's the folded album without the belly band.


Front of the album


Back of the album


Close-up of two of the pages 


Close-up of two of the pages 


Close-up of the first page of the back of the album


Close-up of two of the pages 


Close-up of two of the pages 


Topflight Stamps Products Used:

Other Products Used:
Solar White Classic Crest Cardstock by Neenah Papers
London Fog Cardstock by Bazzill Basics
Copic Markers: 
Miss Dee's Skin: BV0000, BV000, E50, E21, De11, E00, E000, R20 (cheeks)
Miss Dee's Hair: B60, C00, C0
Miss Dee's Eyes: E70, E71, BG10, BG11
Miss Dee's Earrings: B60, C00, C0; BG21, BG23, BG45
Barista Dee's Tie, Cup, Eye Shadow: BG32, BG34, BG45, E77
Barista Dee's Pants: N4, N7
Barista Dee's Boots: R35, R46
Barista Dee's Apron: E71, E74, E77
Barista Dee's Coffee Pot: C00, C0, C1, C4
AM Dee's Robe: BG11, BG13, R20, R32
AM Dee's Slippers and Cap: R20, R30, R32, R35
AM Dee's Coffee Cup: R20, R30, R32, BG32, BG45, E77
Dogs' Fur: E71, E74, E77
Dogs' Eyes: Y23, Y26, FY2
Dogs' Noses: N4, N7, N8
Dogs' Pajamas: BG11, BG13, BG34, BG45, BG90, BG93
Bunny Slipper: R11, R20, E32, RV91, RV92
Dogs' Coffee Mug/Cup: R20, R32, RV93
Tongue: E04, RV42, RV91
Mouth: E04, RV95, RV99
Cat's Fur: E70, E71, T0, T1
Cat's Robe/Pajamas: E30, E42, R30, R32, RV91
Cat's Coffee Cup: BG11, BG13
Black Multi-Liner by Copic
Brown Pitt Artist Pen by Faber Castell
Circles Nestabilities Die Set by Spellbinders
Pinked Circles Nestabilities Die Set by Spellbinders
Alphabet Dies by All Occasions
Scalloped Border Die-Namics Die by My Favorite Things (retired)
Tiny Heart Die: Source Unknown
White and Pink Tattered Cotton Strips by Maisy Mo Designs, a defunct company
White Gelly Roll Gel Pen by Sakura of America
Stamping Platform

Instructions:
  1. Use the base die from the Zig Zag Journal Die Set to cut London Fog (brown) cardstock. 
  2. Fold along the score lines to create an accordion tag album. Set aside.
  3. Use Tuxedo Black Memento Ink to stamp AM Dee ,  Barista Dee , the dogs from the Coffee First  and Morning clear stamp sets, and the cat from the Safety First Clear Stamp Set #254 onto white cardstock.
  4. Fussy-cut all images. 
  5. Use Copic markers to color all of the images, edge them with a black multi-liner, and use a white gel pen to add highlights. Set them aside.
  6. Cut five 2" x 3" pieces of floral paper from the inside back cover of the Coffee and Chocolate Backgrounds 8x8 Paper Pad.
  7. Cut five 2" x 3" pieces of tile patterned paper from the Coffee and Chocolate Patterned 8x8 Paper Pad.
  8. Use Henna Elements Ink to edge all ten rectangles.
  9. Adhere a patterned paper rectangle to each page of the accordion tag album die-cut, alternating between the floral pattern and the tile pattern.
  10. Use the stitched rectangle die from the Zig Zag Journal Die Se to cut coffee-bean patterned paper from the Coffee and Chocolate Patterned 8x8 Paper Pad. 
  11. Repeat until you have ten stitched rectangle die-cuts.
  12. Edge all the stitched rectangle die-cuts with Henna Elements Ink then adhere them to the bottom of each page of the accordion tag album die-cut.
  13. Use a circle Nestabilities die to cut the the clock from the Coffee and Chocolate Patterned 8x8 Paper Pad
  14. Cut the die-cut clock vertically. Mess up and cut off the final "e" of coffee. 
  15. Use Henna Elements Ink to edge the clock.
  16. Adhere the clock to the front page of the album as shown.
  17. Choose two coffee cups/mugs from the Coffee and Chocolate Patterned 8x8 Paper Pad, trim them to 1.69" square, and edge with Henna Elements Ink.
  18. Choose two coffee quotes from the inside from cover of the Coffee and Chocolate Patterned 8x8 Paper Pad trim them, and edge with Henna Elements Ink.
  19. Adhere the trimmed coffee cups and quotes to pages 3 and 5 of the front of the album.
  20. Use the banner die from the Zig Zag Journal Die Set to cut burlap patterned paper from the Coffee and Chocolate Backgrounds 8x8 Paper Pad twice.
  21. Color the flags with Copic markers.
  22. Use the brown Pitt Artist pen to color the tops of both banner.
  23. Adhere the banners to the front of the album as shown.
  24. Use a BG34 Copic marker to color white cardstock.
  25. Cut the colored white cardstock with the alphabet die to spell "I" and "Coffee". Reserve the excess colored cardstock.
  26. Adhere the sentiment to the bottom of the front cover of the tag album.
  27. Use R32 and R20 Copic markers to color white cardstock, cut with a small heart, and adhere between the "I" and the "Coffee" words on the front cover of the tag album.
  28. Use the tag ring die from the  Zig Zag Journal Die Set the cut the excess colored cardstock from Steps #25 and #27.
  29. Use the tag ring die from the  Zig Zag Journal Die Set to cut floral and tile patterned papers.
  30. Adhere all the rings to the tag holes at the top of each page.
  31. Cut London Fog cardstock with both the loopy circles dies from the Zig Zag Journal Die Set until you have four of one pattern and three of the other. 
  32. Adhere the loopy circle die-cuts to the bottom portion of pages 3 and 5 of the front of the tag album, and all five pages of the back of the tag album.
  33. Use the pocket die from the Zig Zag Journal Die Set to cut coffee rings/coffee splatter patterned paper from either the Coffee and Chocolate Patterned 8x8 Paper Pad or the Coffee and Chocolate Backgrounds 8x8 Paper Pad.* 
  34. To create a mirror-image pocket, place the die on the reverse of the patterned paper, and run it through the machine.
  35. Fold both die-cuts on the score lines to create the pocket.
  36. Edge both pockets with Henna Elements Ink.
  37. Place either .125" red-liner tape or strong glue on the outside of the fold lines, taking care to keep adhesive away from the inside of the pockets, then adhere the pockets to pages 2 and 4 of the back of the tag album.
  38. Trim six advertisements from Coffee and Chocolate Patterned 8x8 Paper Pad or the Coffee and Chocolate Backgrounds 8x8 Paper Pad to 1.125" x 2" 
  39. Edge the advertisements with Henna Elements Ink.
  40. Place the advertisements into the pockets.
  41. Adhere the reserved fussy-cut colored Miss Dees to pages 2 and 4 on the front of the tag album.
  42. Adhere the dogs to pages 1 and 5 on the back of the tag album.
  43. The cat from the Safety First Clear Stamp Set will not fit on page 3, so you will have to cut off his tail. Don't worry, it won't hurt him. He's paper. BUT, do not try this with YOUR cat.
  44. Adhere the cat with his tail behind him on page 3 of the tag album.
  45. Use Acorn VersaFine Clair Ink to stamp the sentiment from Coffee First Clear Stamp Set #252 onto a piece of coffee-ringed patterned paper from either the Coffee and Chocolate Patterned 8x8 Paper Pad or the Coffee and Chocolate Backgrounds 8x8 Paper Pad.* 
  46. Cut the sentiment apart, edge with Henna Elements Ink, and adhere to the right edge of page 2 (AM Dee's page) on the front of the tag album.
  47. Use Acorn VersaFine Clair Ink to stamp the "More Espresso" sentiment from Barista Dee Clear Stamp Set  and the "Life Happens" sentiment from the Coffee Time Clear Stamp Set onto a piece of coffee-ringed patterned paper from either the Coffee and Chocolate Patterned 8x8 Paper Pad or the Coffee and Chocolate Backgrounds 8x8 Paper Pad.* 
  48. Trim both sentiments, edge with Henna Elements Ink, and adhere to the right edge of page 4 (Barista Dee's page) of the tag album.
  49. Select three sentiments from the Sharp Tongues White Ephemera Die Cuts and adhere to the tops of pages 1, 3, and 5 on the back of the tag album.
  50. Use BG 11, BG34, and E71 markers to color white Tattered Cotton Strips. Heat set.
  51. Thread the cotton strips through the tags holes to finish the album.
  52. Use the scalloped border die to cut London Fog cardstock. 
  53. Cut a 6" x .375" strip of coffee-bean patterned paper from the Coffee and Chocolate Patterned 8x8 Paper Pad, edge with Henna Elements Ink, and adhere to the center of the border die-cut to create the belly band. 
  54. Place the combined strip around the tag accordion album so that the ends of the strip overlap. Mark where that occurs.
  55. Slide the strip off of the album.
  56. Adhere the ends of the strip together to form the belly band. Secure the overlap with a staple.
  57. Use a small Nestabilities Circle De to cut the "Good Days" circle from patterned paper and edge with Henna Elements Ink.
  58. Use a Pinked Circles Die to cut London Fog cardstock.
  59. Adhere the patterned paper circle to the pinked circle die-cut.
  60. Adhere the matted circle die-cut over the staple on the belly band.
Note:
Thanks for visiting.